would a 411 8A make a good speaker for a sub?

**bowtie427ss** · August 8th, 2013, 01:35 PM

sounds like also need to add a pair 210s / 1005s

Rent a truck, i'll give you my address.

GM · August 8th, 2013, 03:46 PM

Originally Posted by Phil-G

Rockford Fosgate? - RFTECH Support M110S4 (dammit i'll try and copy the pdf when i get home)

This one? http://www.rockfordfosgate.com/rftec.../M110S4-TS.pdf

GM

**Phil-G** · August 8th, 2013, 04:00 PM

Yep that's it. they don't seem to have a very high efficiency rating. But they were free.

**Alien_Shore** · August 10th, 2013, 12:27 AM

There's always something like this

**bowtie427ss** · August 10th, 2013, 06:40 AM

Originally Posted by Alien_Shore

There's always something like this

Meyer makes one sub solution that sticks out above all others, and it ain't cheap. PSW-6 it doesn't quite have the intestinal distressing high output of an EAW KF-940. But, it is the highest sound quality large format subwoofer system i've ever heard and felt. PSW-6 : High-Power Cardioid Subwoofer

**Phil-G** · August 17th, 2013, 11:04 PM

my first try. 14"x20"x24" 10" RF marine without the bucking magnets. i built the slot for the tens first and am building the box around that. i still haven't decided where the 3" port tubes are going. any recomendations? i'm thinking near the top on either side, about 3" over from the side and 3" down from the top.

**Alien_Shore** · August 19th, 2013, 10:00 AM

Originally Posted by Phil-G

i still haven't decided where the 3" port tubes are going. any recomendations? i'm thinking near the top on either side, about 3" over from the side and 3" down from the top.

Port placement doesn't matter much - rule of thumb I've read repeatedly is within 6" of driver (double reflex design notwithstanding).